HOW TO MAKE A RING SMALLER WITH HOT GLUE

Let's see together how to make a ring smaller with hot glue.

Raid the craft closet or call on a crafty friend and grab a hot glue gun😁.

That and a stick of glue is all that's necessary to give a ring a snugger fit.

Follow manufacturer instructions to heat up the gun and glue⚠.

And then create a dime-sized puddle of melted glue on a piece of cardboard or foil.

Use a toothpick to smear some of the glue onto the inside of the band.

In the part of the ring that will hit the underside of the finger👌.

Method

Using a toothpick gives us plenty of control over where the glue ends up.

But it's also fine to skip that step and dot the glue straight from the gun onto the ring.

Keep ring standing while the glue become dry.

Glide a pencil over the ring and balance the pencil on top of a glass.

So the ring is on hold in air.

Rind off glue and reprise the procedure if the ring still doesn't fit.

Through mis-measurement and a tiny bit of miscommunication.

I have a beautiful, handmade just for me engagement and wedding rings that are half a size too big🤦‍♂️.

Instead, I decided to figure things out for myself and I knew I had to share.

I hope you enjoy these tricks on how to make a ring smaller with hot glue!

There will be no damage or permanent alterations to your ring😊.

Pros:

• We can change the ring 2-3 sizes with this trick✌.

• The glue is easy to peel off. So whether you under- or overestimated the size on the first try.
  It’s super simple to start from scratch again✌.

• We’ll be able to return that ring to whomever you borrowed it from as good as new!

Cons:

• Glue is not a long term joiner which will last long. 

• Ring might be tore again if stretch with little more force.

• Color may get effected

Your ring is now ready to wear again. Usually this lasts a few weeks to a month.

I like how there are no edges like the plastic ring sizer.

Hope this little DIY helps you 🙂.

Ingredients required:

• -Hot glue gun
• -Ring that is too big
• -paper to put the glue on

Instruction:

1. Clean your ring well with ring cleaner first.

2. Put the hot glue onto a piece of paper.

3. Dip your ring into the glue.

4. Let your ring dry for 5 minutes.

5. Try the ring on for size, if it is still too big; repeat the steps until it fits😉.

Now that you know how to make a ring smaller with hot glue, let's find out about the last question you may have.

WILL HOT GLUE DAMAGE A RING?

Sometime, when we are out of money, we can use glue to resize our ring and it’ll not effect and damage our ring.

 Don't forget to share your thoughts with me in the comment section.

 You can join our Facebook group to share your thoughts or ask others.

I'd also share other awesome ways with you.